HVAC hygiene for Lower North Shore offices & strata ยท Free quotesFree, no-obligation quotes02 7241 5026

Air handling unit and fan coil cleaning

For commercial floors we clean fan coil units and smaller air handling units, including fan wheels, housings and plenums. Work can be staged floor by floor so tenants keep air conditioning in the areas not being serviced.

Many North Sydney office buildings and larger strata blocks condition their spaces with fan coil units hidden in ceiling voids, or with smaller air handling units serving a floor or a wing. These units contain the fan, coil, filters and plenums that every other part of the system depends on. They also tend to be the least visited part of the building: out of sight above the ceiling, accessed only when something breaks. As a result, the inside of a fan coil unit is often far dirtier than the diffusers below suggest.

Our work on these units starts with a survey of how many there are, where they sit and how they are accessed. Each unit is then isolated, opened and cleaned in airflow order. Filters are cleaned or replaced, the coil and drain tray are cleaned, the fan wheel and housing are brushed and extracted, and the supply and return plenums are vacuumed and wiped. Where a unit has internal insulation, we clean it gently and note any that is breaking down, as loose fibre can be carried downstream.

For multi-floor buildings, we stage the work floor by floor or zone by zone, coordinating with building management so tenants keep air conditioning where they need it. Each unit gets its own entry in our notes, with photos where access allows, which gives facility managers a useful reference for future maintenance cycles. It also makes it easy to spot units that load up faster than the rest of the building.

Comfortable home interior in North Sydney

What this service includes

  • Survey of unit numbers and access
  • Each unit isolated and opened
  • Filters, coil and drain tray cleaned
  • Fan wheel and housing cleaned
  • Supply and return plenums vacuumed
  • Individual notes and photos per unit

When to book

  • Fan coil units have not been opened in years
  • Tenants report stuffy or smelly zones
  • Uneven airflow between floors
  • A building maintenance plan is being set up

Common questions

Can you clean fan coil units while the floor is occupied?

We prefer after-hours or staged work so units can be isolated without affecting staff. Where daytime access is necessary, we can work through units one zone at a time, protecting desks below and keeping noise to a minimum. The approach is agreed with building management during scoping.

What about the large central air handling plant?

We clean smaller air handling units and fan coil units as part of our scope. Large central plant in plant rooms is generally maintained under the building's mechanical services contract. We can inspect and discuss what is achievable and work alongside your mechanical contractor where a coordinated approach suits the building.

Ask about Air handling and fan coil units

Tell us a little about your system and we will come back to you with a free quote.

We only use your details to reply to this enquiry.

How it works

Our four-stage method

  1. 1

    Assess

    We gather system details, check plans or access points and confirm the scope. For larger sites, a short site visit lets us quote accurately and plan isolation.

  2. 2

    Isolate and protect

    The system is shut down safely, work areas are covered, and the negative-air machine is connected so the ductwork is under suction before cleaning starts.

  3. 3

    Clean in airflow order

    We work from the return and filter through the coil and fan to the supply ducts and diffusers, so cleaned sections are not contaminated again by upstream dust.

  4. 4

    Restart and report

    The system is reassembled, restarted and checked. You receive our notes and photos, along with any maintenance points worth passing to your HVAC contractor.

Service area

Lower North Shore service area

Our work centres on North Sydney and the harbourside suburbs around it, covering both commercial buildings and homes.

  • Neutral Bay
  • Cremorne
  • Kirribilli
  • Milsons Point
  • McMahons Point
  • Lavender Bay
  • Waverton
  • Wollstonecraft
  • Crows Nest
  • Cammeray
  • St Leonards
  • Mosman

Need your ducts cleaned in North Sydney?

Tell us about your building or home system and we will scope the work and send a free quote.

Call nowFree quote