HVAC hygiene for Lower North Shore offices & strata ยท Free quotesFree, no-obligation quotes02 7241 5026

Coil and drain tray cleaning for harbourside humidity

Evaporator coils clogged with dust lose efficiency and hold moisture. We clean coil faces with a coil-safe cleaner, flush and treat the drain tray, and check that condensate is draining freely so water is not left sitting inside the unit.

Sydney's humid summers put a heavy moisture load on cooling coils. Every hour a system runs, it pulls water out of the air, and that condensate drips from the coil into a drain tray and away through a drain line. When the coil face is coated in dust, it holds water like a sponge. When the tray is dirty or the drain line partly blocked, water sits in the bottom of the unit. Both create the damp, organic-rich conditions where mould, slime and odour take hold.

We clean coils with a coil-safe cleaner suited to the fin material, letting it work through the build-up before rinsing carefully so the runoff is captured in the tray. The fins are inspected and any damage noted. The drain tray is then scrubbed, flushed and treated, and the drain line checked to make sure water actually leaves the unit. On fan coil units serving commercial floors, we work through units in sequence so occupied zones keep conditioning while others are serviced.

Many musty-smell complaints in North Sydney offices and apartments trace back to this one area. Cleaning the coil and tray addresses the source, rather than perfuming the symptom. Our notes record the condition of each coil and tray, any drain problems and any signs, such as icing or corrosion, that should be passed to your mechanical contractor. Those items are flagged separately so they are easy to act on.

Air conditioning vent and ductwork detail

What this service includes

  • Coil-safe cleaner applied to coil face
  • Controlled rinse into the drain tray
  • Fin condition checked and noted
  • Drain tray scrubbed and treated
  • Drain line flow confirmed
  • Unit-by-unit notes for your records

When to book

  • A musty smell when cooling starts
  • Water stains below an indoor unit
  • Cooling output has dropped noticeably
  • Slime or growth visible in the tray

Common questions

Why does the drain tray matter so much?

The drain tray collects condensate from the coil. If it is dirty or the drain is sluggish, water sits there in the warm, dark interior of the unit, which suits mould and bacteria. Air then passes right over it on the way to the ducts. A clean, freely draining tray removes that reservoir.

Do you repair blocked or leaking drain lines?

We check drain flow and clear light blockages at the tray outlet as part of the clean. Damaged pipework, faulty condensate pumps or drains that need re-grading are plumbing or mechanical repairs. We note what we find and recommend passing it to your mechanical contractor or plumber.

Ask about Coil and drain tray cleaning

Tell us a little about your system and we will come back to you with a free quote.

We only use your details to reply to this enquiry.

How it works

Our four-stage method

  1. 1

    Assess

    We gather system details, check plans or access points and confirm the scope. For larger sites, a short site visit lets us quote accurately and plan isolation.

  2. 2

    Isolate and protect

    The system is shut down safely, work areas are covered, and the negative-air machine is connected so the ductwork is under suction before cleaning starts.

  3. 3

    Clean in airflow order

    We work from the return and filter through the coil and fan to the supply ducts and diffusers, so cleaned sections are not contaminated again by upstream dust.

  4. 4

    Restart and report

    The system is reassembled, restarted and checked. You receive our notes and photos, along with any maintenance points worth passing to your HVAC contractor.

Service area

Lower North Shore service area

Our work centres on North Sydney and the harbourside suburbs around it, covering both commercial buildings and homes.

  • Neutral Bay
  • Cremorne
  • Kirribilli
  • Milsons Point
  • McMahons Point
  • Lavender Bay
  • Waverton
  • Wollstonecraft
  • Crows Nest
  • Cammeray
  • St Leonards
  • Mosman

Need your ducts cleaned in North Sydney?

Tell us about your building or home system and we will scope the work and send a free quote.

Call nowFree quote